Crossport Systems Pivio Manuál s instrukcemi Strana 44

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 45
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 43
Off-Season Maintenance Procedure for Lincoln Quicklub Automatic
Lubrication System-203 Style Pumps
Most farm machinery is purchased for specific needs and is only used at certain times of the
year. Machinery equipped with Lincoln 203 Style Automatic Lubrication Systems most
commonly sit idle for many months of the year.
In the past several months, during machinery start up, we received a few calls regarding lube
system start up issues. Our research of the reported issues determined that most were related
to the grease being used.
Greases react in different manners to various pressures and temperatures they are exposed
to. Some grease’s tend to separate over time due to inactivity. We recommend that you look
to your grease supplier for a recommendation of a grease that is less likely to separate under
your specific conditions.
Grease “pump-ability” and “flow-ability” are key factors in making sure the Lincoln Automatic
Lubrication system works as expected. We have found that after startup of the equipment and
the lube system, and after the lube system is cycling periodically, we receive very few reports
of system issues. In an effort to prevent issues during the next season start-up, we have
developed the following “Off Season Maintenance Procedure” that we feel will better insure the
results that you expect the next time you use your equipment.
PLEASE NOTE:
- You must perform this procedure on a monthly basis to prevent system issues
during the next usage.
- Leave only enough grease in the pump to perform Step #1. DO NOT FILL THE
RESERVOIR AFTER THE LAST USAGE OF THE YEAR.
Off Season Maintenance Procedure
1. Turn the machinery ignition switch on and manually cycle the lubrication system by
depressing the “manual lube” button located directly under the red and blue rotary timer
switches on the front of the pump housing under the timer access cover. Depressing the
button for 2 seconds will initiate a manual lube event. Cycle the system at least two more
times to insure the grease is cycled through the primary valve.
Zobrazit stránku 43
1 2 ... 39 40 41 42 43 44 45

Komentáře k této Příručce

Žádné komentáře